TGSUV1B (Residential Use)
Ideal for the home owner /residential user. The adjustable spread path is designed for one-pass coverage of driveways and access roads.Dimensions:40.5"H x 22.5"W x 20.5"D

  • Features an attractive and rugged polymer black hopper and orange powder coated steel mounting frame.
  • Fold-away featureósimply release hitch pin and spreader folds away for easy access to rear door or tailgate.
  • Capacity: 4.413 cubic feet/331 pounds #1 rock salt or similar material.
  • Heavy-duty 12-volt spreader motor is housed in a sealed motor chamber. Includes cigarette plug adapter.
  • Material flow for 12ft. - 14ft. controlled from a manual, stainless steel open/close gate, and an in-cab on-off control.
  • Ultra-smooth hopper interior allows material to flow through the gate, to the stainless steel lined hopper throat and spinner, providing an even flow of material
  • Includes all mounting hardware for 1-1/4" and 2"receiver hitches.
  • UPS shippable.
TGSUVPROA SUV Professional Tailgate Spreader

TGSUVPROA SUV (Light Commercial Use)
Ideal for residential/light commercial applications
Dimensions: 40.5"H x 22.5"W x 20.5"D

  • Features an attractive and rugged polymer black hopper and orange powder coated steel mounting frame.
  • Fold-away featureósimply release hitch pin and spreader folds away for easy access to rear door or tailgate.
  • Capacity: 4.413 cubic feet/331 pounds #1 rock salt or similar material.
  • Heavy-duty sealed ball bearing 1/6 HP spreader motor with with direct-to-battery wire harness.
  • Material flow up to 30 feet controlled from an in-cab variable speed control.
  • Ultra-smooth hopper interior, in addition to the auger design, provide for easy flow material flowand reduce material "bridging".
  • Comes complete with all mounting hardware for 2"receiver hitches.
  • UPS shippable.
TGS05B Low Profile Tailgate Spreader

TGS05B Low Profile Tailgate Spreader.
Commercial grade salt spreader features a low-profile design for unrestricted rear view & a protected iternal motor assembly.
Dimensions: 40.1"H x 54.3"W x 27.3"D

  • Attractive and rugged polymer black hopper and orange powder coated steel mounting frame to resis rust and corrosion.
  • Capacity: 10.79 cubic feet/809 pounds #1 rock salt or similar material.
  • Heavy-duty 12-volt spreader is housed in a seal motor chamber. The motor is located inside the hopper for extra protection.
  • Material flow and spreader and spreader width, from 3ft. to 30ft. are controlled from an in-cab electronic spreader control panel.
  • Ultra-smooth hopper interior, in addition to the auger design, provide for east material flow and reduced material "bridging".

TGS06
Dimensions: 45" H x 52" W x 27" D

  • Rotationally molded double-wall construction requires no welded steel framework.
  • Heavy-duty 12-volt spreader motor is housed in a sealed motor chamber inside the hopper for extra protection.
  • Concealed 80 lb. vibrator.
  • Mount directly to 2" hitch receiver or to bumper (includes universal stake pocket attachment and mounting hardware).
  • Forward pivoting non-removable lid with self-latching handle.
  • Molded-in hopper handles.
  • Easy to assemble.
  • Easy to use flow-gate design.
  • Material flow & spread width, from 3' to 30' controlled from an in-cab electronic spreader control panel.
  • Easy maintenance (motor replacement).
  • Capacity: 10 cu. ft. #1 rock salt or similar material.
  • Lighter weight unit for higher load capacity.

SHPE0750 is a completely self-contained, ultra-durable spreader unit designed for ice and snow control. The rugged design allows for use with salt or salt/sand mix, and is also ideal for broadcsting seed, fertilizer, game feed, etc. The complete assembly mounts easily on utility vehicles, or º-ton pickups, making it ideal for municipalities, shopping malls, industries, hospitals and private contractors.

MATERIAL HOPPER Rotationally molded double-wall polymer unibody spreader with smooth angled walls to maximize material flow. Features integrated positive position mount system plus 4-piece ratchet tie-down kit. No drilling required. Molded fork slots in hopper makes for easy one man installation and removal; requires extended forks, or lift either series with 4-point tie downs.
AUGER Screw-type auger system travels the length of the hopper floor, providing maximum material flow at a continuous rate. An independent spinner/auger controller allows for both independent spinner speed and an infinitely adjustable ratio between spinner and auger.
MATERIAL FLOW/OUTPUT Salt, 2.2 cu. ft. / minute; Salt-Sand, 1.3 cu. ft. / minute. Spread width is variable from 5 to 38 feet.
SPINNER CHUTE ASSEMBLYAn 11.5" polymer disc with four fins is connected to a 3/4" diameter shaft. The spreading material is guided from the stainless steel trough to the spinner plate through an enclosed heavy-duty poly chute and spinner assembly with an external deflector. The extra-wide adjustable deflector protects the rear and under carriage of the vehicle, and allows for complete directional spread control and full or compact spread. Total spread path ranges from 5' to 38'. A convenient spring-latch locking mechanism allows the spinner assembly to be easily removed for cleaning/storage.
ELECTRIC MOTORS Two ultra-quiet 12-volt DC direct-drive motors power the auger and spinner, and are encased in a heavy-duty poly housing along with the independently powered vibrator. The wiring harness is constructed of 10-gauge automotive wire with non-combustible sheathing (-50∞ to -105∞ C). An in-cab console features independent controls for the auger, spinner and vibrator.
STANDARD EQUIPMENT 1/4" black powder coated steel top screen. Heavy-duty poly-vinyl tarp with reinforced corners and tie-down kit. Heavy-duty 12 VDC vibrator, rated at 210 foot pounds for maximum performance. Spreader hold-down kit.

SHPE0750: Overall Length, 53"; Width, 48"; Capacity Struck, 0.6 cu. yd.; Capacity Rounded, 0.75 cu. yd.; Recommended use, Utility Vehicles or º-Ton pickups.

 

SHPE1500 1.5CY Salt Dogg Hopper Spreader

SHPE1500 1.5CY SaltDogg Hopper Spreader.
Ideal for Medium and Heavy Duty Commercial Applications.
General ñThe SHPE series electric polymer Salt Dogg spreaders are completely self-contained, ultra-durable spreader units designed for ice and snow control. The rugged design allows for use with salt or salt/sand mix. The complete assembly mounts easily on pickup, dump and platform trucks, making it ideal for municipalities, shopping malls, industries, hospitals and private contractors.
MATERIAL HOPPER Rotationally molded double-wall polymer unibody spreader with smooth angled walls to maximize material flow. Features integrated positive position mount system plus 4-piece ratchet tie-down kit. No drilling required. Molded fork slots in hopper makes for easy one man installation and removal; requires extended forks, or lift either series with 4-point tie downs.
AUGER Screw-type auger system travels the length of the hopper floor, providing maximum material flow at a continuous rate. An independent spinner/auger controller allows for both independent spinner speed and an infinitely adjustable ratio between spinner and auger.
MATERIAL FLOW/OUTPUT Salt, 2.2 cu. ft. / minute; Salt-Sand, 1.3 cu. ft. / minute. Spread width is variable from 5 to 38 feet.
SPINNER CHUTE ASSEMBLY An 11.5" polymer disc with four fins is connected to a 3/4" diameter shaft. The spreading material is guided from the stainless steel trough to the spinner plate through an enclosed heavy-duty poly chute and spinner assembly with an external deflector. The extra-wide adjustable deflector protects the rear and under carriage of the vehicle, and allows for complete directional spread control and full or compact spread. Total spread path ranges from 5' to 38'. A convenient spring-latch locking mechanism allows the spinner assembly to be easily removed for cleaning/storage.
ELECTRIC MOTORS Two ultra-quiet 12-volt DC direct-drive motors power the auger and spinner, and are encased in a heavy-duty poly housing along with the independently powered vibrator. The wiring harness is constructed of 10-gauge automotive wire with non-combustible sheathing (-50∞ to -105∞ C). An in-cab console features independent controls for the auger, spinner and vibrator.
STANDARD EQUIPMENT 1/4" black powder coated steel top screen. Heavy-duty poly-vinyl tarp with reinforced corners and tie-down kit. Heavy-duty 12 VDC vibrator, rated at 210 foot pounds for maximum performance. Spreader hold-down kit.

SHPE1500 & SHPE1500X: Overall Length, 92" (requires 77" minimum bed length. Fits all 8' beds and most standard 6' beds); Capacity Struck, 1.45 cu. yd.; Width, 50.5"; Height, 37.5"; Recommended use, 3/4 or 1-Ton trucks.

SHPE2000 2.0CY SaltDogg Hopper Spreader.
IDEAL FOR MEDIUM AND HEAVY DUTY COMMERCIAL APPLICATIONS.
The SHPE2000 series electric polymer Salt Dogg spreaders are completely self-contained, ultra-durable spreader units designed for ice and snow control. The rugged design allows for use with salt or salt/sand mix. The complete assembly mounts easily on pickup, dump and platform trucks, making it ideal for municipalities, shopping malls, industries, hospitals and private contractors.
MATERIAL HOPPER Rotationally molded double-wall polymer unibody spreader with smooth angled walls to maximize material flow. Features integrated positive position mount system plus 4-piece ratchet tie-down kit. No drilling required. Molded fork slots in hopper makes for easy one man installation and removal; requires extended forks, or lift either series with 4-point tie downs.
AUGER Screw-type auger system travels the length of the hopper floor, providing maximum material flow at a continuous rate. An independent spinner/auger controller allows for both independent spinner speed and an infinitely adjustable ratio between spinner and auger.
MATERIAL FLOW/OUTPUT Salt, 2.2 cu. ft. / minute; Salt-Sand, 1.3 cu. ft. / minute. Spread width is variable from 5 to 38 feet.
SPINNER CHUTE ASSEMBLY An 11.5" polymer disc with four fins is connected to a 3/4" diameter shaft. The spreading material is guided from the stainless steel trough to the spinner plate through an enclosed heavy-duty poly chute and spinner assembly with an external deflector. The extra-wide adjustable deflector protects the rear and under carriage of the vehicle, and allows for complete directional spread control and full or compact spread. Total spread path ranges from 5' to 38'. A convenient spring-latch locking mechanism allows the spinner assembly to be easily removed for cleaning/storage.
ELECTRIC MOTORS Two ultra-quiet 12-volt DC direct-drive motors power the auger and spinner, and are encased in a heavy-duty poly housing along with the independently powered vibrator. The wiring harness is constructed of 10-gauge automotive wire with non-combustible sheathing (-50∞ to -105∞ C). An in-cab console features independent controls for the auger, spinner and vibrator.
STANDARD EQUIPMENT 1/4" black powder coated steel top screen. Heavy-duty poly-vinyl tarp with reinforced corners and tie-down kit. Heavy-duty 12 VDC vibrator, rated at 210 foot pounds for maximum performance. Spreader hold-down kit.
SHPE2000 & SHPE2000X: Overall Length, 96" (requires 77" minimum bed length. Fits all 8' beds and most standard 6' beds); Capacity Struck, 2.00 cu. yd.; Width, 47.5"; Height, 40"; Recommended use, 3/4 or 1-Ton trucks above 8,500 lbs. GVWR.

 

 

SHPE4000 IDEAL FOR HEAVY DUTY MUNICIPAL & COMMERCIAL APPLICATIONS.
The SHPE series SaltDogg spreaders are completely self-contained, ultrañdurable spreader units designed for ice and snow control. The rugged design allows for use with salt or salt/sand mix. The complete assembly mounts easily on dump, platform and utility trucks, making it ideal for municipalities, shopping malls, industries, hospitals and private contractors.
Material hopper Rotationally molded polymer hopper with smooth angled walls to maximize material flow.
Auger 5.5" Dia. screw-type auger system travels the length of the hopper floor, providing maximum material flow at a continuous rate. An independent spinner/auger controller allows for both independent spinner speed and an infinitely adjustable ratio between spinner and auger.
Material flow/output Salt, 3.2 cu. ft./minute; Salt/Sand, 2.3 cu. ft./minute. Spread width is variable from 5 to 38 feet.
Spinner chute assembly A 16" polymer disc with six fins is connected to a 3/4" diameter shaft. The spreading material is guided from the stainless steel trough to the spinner plate through an enclosed heavy-duty polymer chute and spinner assembly with an external deflector. The extra-wide adjustable deflector protects the vehicle and allows for complete directional spread control and full or compact spread. Total spread path ranges from 5' to 38'. A convenient spring-latch locking mechanism allows the spinner assembly to be removed for cleaning/storage.
Electric Gear motors Two 12-volt DC direct-drive motors power the auger and spinner, and are encased in a heavy-duty poly housing along with the independently powered vibrator. The wiring harness is constructed of 10-gauge automotive wire with non-combustible sheathing (-50∞C to -105∞C). An in-cab console features independent controls for the auger, spinner and vibrator.
Standard equipment 1/4" black powder coated steel top screen. Heavy-duty poly-vinyl tarp with reinforced corners. Heavy-duty 12 VDC vibrator, rated at 400 foot pounds for maximum performance. Spreader hold-down kit.
SHPE4000 Overall Length, 100" (Hopper 90"); Width, 74"; Height, 43"; Weight, 878 lbs.; Capacity Struck, 4.0 cu. yd.; Recommended Use, 1-Ton Dump Bodies.

1400600SS IDEAL FOR HEAVY DUTY MUNICIPAL & COMMERCIAL APPLICATIONS.
1.8 cubic yard stainless steel hopper spreader features dual, ultra-quiet 12V direct-drive electric motors, providing independent control of† drag chain and spinner. The rugged design allows for use with salt, sand and other materials. The complete assembly mounts easily on 3/4-ton and 1-ton pickup, dump and platform trucks making it ideal for municipalities, shopping malls, industries, hospitals and private contractors.
MATERIAL HOPPER - High-quality grade 304 stainless steel components, including: Hopper, Hopper Supports, Hopper Floor, Gussets, Spinner Chute Assembly, Deflectors and Engine Hood. Electrically welded ends and sides sloped at 45 degrees are constructed with channel formed top edges. Vertical supports add extra strength to the unit. The single lift point on the cross support beam is located at the unitís center of gravity to allow for easy loading and unloading.
CONVEYOR The conveyor is made of 12" wide all-steel pintle chain with 3/16" x 3/4"cross bars. Chain strength is 11,000 lbs.per strand;22,000 lbs. total weight. The drive sprockets are 6-tooth cast iron, on a 1-1/8" diameter shaft. The conveyor chain has an adjustment range of 3-1/2". The drive shaft has heavy-duty, sealed, self-aligning ball bearings with grease fittings. The idler drum has heavy-duty 1" diameter ball bearings.
CONVEYOR GEAR CASE Gear is constructed of aluminum bronze, worm gear is hardened steel and ground. Housing is made of durable cast iron. Gear ratio is 20:1 with 1" input shaft and 1-1/8"output shaft on tapered roller bearings.
FEEDGATE Lever operated with a friction lock for accurate adjustment.
SPINNER CHUTE ASSEMBLY Feature high-quality grade 304 stainless steel Spinner Chute Assembly, Deflectors and Hood. A polymer disc with four fins is connected to a 3/4"diameter shaft secured on two pillow block bearings. The spreading material is guided from the conveyor to the spinner plate through an enclosed chute with internal and external deflectors. Adjustable deflectors allow for complete directional spread control and full or compact spread. Total spread radius ranges from 2' to 25'. The extra wide rear deflector protects the rear and under carriage of the vehicle.

1400050SS Hopper Sand & Salt Spreader Kit

1400050SS Hopper Sand & Salt Spreader Kit.
1.8 Cubic Yard 96" Gas Stainless Steel Hopper Sand & Salt Spreader Kit

 

1400300SS Hopper Sand & Salt Spreader Kit.
2.3 Cubic Yard 120" Gas Stainless Steel Hopper Spreader Kit.

1400550SS 4.5CY Stainless Steel Hopper Spreader Kit

1400550SS 4.5CY Stainless Steel Hopper Spreader Kit.
4.5 Yard Stainless Steel Salt & Sand Spreader.
(Shown here with Optional Lightbar.)